Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 2.125 inches
- Dh mm 54.000 mm
- Groove Diameter Dg 2.245 - 2.257 - inches
- Groove Width W 0.086 - 0.091 - inches
- Groove Depth D 0.063 inches
- Free Diameter Df 2.271 - 2.341 - inches
- Section S 0.166 - 0.176 - inches
- Thickness T 0.076 - 0.080 - inches
- Notch Depth Nd 0.055 - 0.085 - inches
- Notch Width Nw 0.093 inches
- Hardness ST 45.000 - 52.000 - HRC
Performance Data
- Allowable Static Thrust Load 6,810.000 lbs.
Materials
- Carbon Steel (SAE 1060-1090)
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
- OIL - Oil over Steel, Carbon Steel
Documentation
Description
Snap Ring, Internal Notched, Inch. Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove holds an assembly in place.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.