Part Data
- Housing or Shaft Housing
- Axial or Radial Axial
- Housing Dia. Dh 3.250 inches
- Dh mm 82.500 mm
- Groove Diameter Dg 3.440 - 3.452 - inches
- Groove Width W 0.120 - 0.125 - inches
- Groove Depth D 0.098 inches
- Free Diameter Df 3.568 - 3.678 - inches
- Thickness T *** 0.106 - 0.112 - inches
- Lug Height H 0.334 - 0.350 - inches
- Maximum Section S Max 0.261 - 0.277 - inches
- Minimum Section S Min 0.127 - 0.143 - inches
- Hole Diameter R 0.123 - 0.140 - inches
- Weight Per 1000 Pcs. 60.000 lbs.
- Edge Margin Y Min. inches
- Clearance Dia. Compressed In Housing L1 2.540 inches
- Clearance Dia. Released In Groove L2 2.730 inches
- Gap Width Ring In Groove G 0.698 inches
- Hardness ST 47.000 - 52.000 - HRC
- Hardness SS 44.000 - 51.000 - HRC
- Hardness BC 34.000 - 43.000 - HRC
- Interchange Waldes Truarc N5000 325
- Interchange IRR 3000 X325
- Interchange Anderton N1300 0325
- Interchange Mil Or Aero MS16625E 325
- Interchange Din
Performance Data
- Thrust Ld. (lbs.) Ring Safety Factor Of 4 Pr 50,750 lbs.
- Thrust Ld. (lbs.) Groove Safety Factor Of 2 Pg 27,000 lbs.
Tool Data
- Ratchet Pliers (w/o Tips) RP-27R
- Straight Ratchet Pliers Tips RP-5009R
- 45 Ratchet Pliers Tips RP-5012R
- 90 Ratchet Pliers Tips RP-5013R
- Alternative Ratchet Pliers (w/o Tips) RP-900
- Tips For Alt. Ratchet Pliers (Strt/45/90) RP-7801R RP-7845R RP-7890R
Materials
- Carbon Steel (SAE 1060-1090)
- Stainless Steel (PH15-7 Mo, PH17-7)
- Beryllium Copper
- Special Material Grades
Finishes
***For plated rings, add .002" (.05 mm) to the listed maximum thickness.
- PA - Phosphate, Carbon Steel
- PD - Phosphate and Oil, Carbon Steel
- PAL - Phosphate with Sealer, Carbon Steel
- HPD - Heavy Phosphate and Oil, Carbon Steel
- ZD - Zinc Plating, Carbon Steel
- ZF - Zinc Bright, Carbon Steel
- ZDL - Zinc Dichromate with Sealer, Carbon Steel
- HZDL - Heavy Zinc Dichromate with Sealer, Carbon Steel
- Z3X - Trivalent Chromate over Zinc, Carbon Steel
- ZFF - Zinc Flash, Carbon Steel
- CF - Copper Flash, Carbon Steel
Documentation
Description
Axially Assembled, Internal. Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a shoulder) holds an assembly in place.
More than Parts. A True Partnership.
Our passion is creating the best rings, springs, and clamps. Our mission is to make your work a success. We are here for you.