 |
| Navigation
|
| Online Services
|
| Quick Links
|
|
Rotor Clip LTD © 2010
Innovation Every Day
|
|
|
|
|
|
|
|
Part Number: | SHI-100 |
|
Shaft
|
|
axial
|
|
0.984 (25.0 mm)
|
|
4.800 (2.18 Kg)
|
|
±.002 (0.1 mm)
|
|
0.042 (1.1 mm)
|
|
+.005 / -.010 (0.1 mm)
|
|
0.925 (23.5 mm)
|
|
±.005 (0.1 mm)
|
|
0.072 (1.8 mm)
|
|
0.144 (3.7 mm)
|
|
63/64
|
|
+.010 / -.002
|
|
0.050 (1.3 mm)
|
|
Scale: C / Rockwell: 47-53
|
|
Scale: C / Rockwell: 44-51
|
|
Scale: C / Rockwell: 37-43
|
|
1.250 (31.8 mm)
|
|
1.300 (33.0 mm)
|
|
1
|
|
20000
|
|
0.94
|
|
.030
|
|
1.25
|
|
1.000
|
|
1.26
|
|
1.31
|
[Ring Data]
[Performance Specs]
[Tool Specs]
[Shipping Info]
[All Specs]
[Printable Version]
[Show Series] [Request Quote]
[Request Samples]
Designation: SHI, Type: External, Inverted ( shafts & pins), Size Range: .500-3.98 inches (12.7-100 mm), Description: External SHaft Inverted ring. Functions like an SH ring on a shaft, only the lugs are "reversed." This version reduces the distancethe lugs of the standard SH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance is minimal.
|
|
|
|
|
| * F.I.M. (FULL INDICATOR MOVEMENT)-MAXIMUM ALLOWABLE DEVIATION OF CONCENTRICITY BETWEEN GROOVE AND SHAFT. î BASED ON HOUSINGS/SHAFTS MADE OF COLD ROLLED STEEL. FOR AN EXPLANATION OF FORMULAS USED TO DERIVE THRUST LOAD AND OTHER PERFORMANCE DATA, CONTACT THE ROTOR CLIP ENGINEERING DEPARTMENT. ***FOR PLATED RINGS, ADD .002" TO THE LISTED MAXIMUM RING THICKNESS. MAXIMUM RING THICKNESS WILL BE A MINIMUM OF .0002" LESS THAN THE LISTED GROOVE WIDTH (W) MINIMUM. |
|
|
|
International
|
|
|
